- ·The role of hydraulic machine
- ·Acting hydraulic machine hydraulic valves and connections
- ·Cause the hydraulic pressure generated disorders
- ·If the temperature of hydraulic machine is too high what hidden
- ·Hydraulic cleaning method
- ·How to correctly use hydraulic oil in injection molding equipment
- ·Control stability analysis of frame hydraulic pressure sensor
- ·Hydraulic machine features and uses
- ·How mechanical punching machine is a clear hole?
- ·How to choose the diameter of the aperture processing
More
Car Seat hydraulic punching machine you know how to use it?
Cushion punching machine, is a versatile hydraulic punching machine, and all kinds of leather car seat for punching effect is beautiful, the quality and effect of the product punching machines have been praised. Then the car seat hydraulic punching machine you know how to use it?1, if the car seat hydraulic punching machine into a plurality of stations, there is a switch on each cylinder oil, you can only switch to open a passage to work, you can not open multiple oil switch, otherwise it will lead pressure is not enough, slow.
2, installed after the mold, insert pipe punching. Prohibited in the absence of red pipes were empty, otherwise it will damage the mold.
3, car seat hydraulic punching machine at full hole punch, punch-through automatically if there is no return, please move down the bottom of the proximity switch.
4, in the half-hole punch, if the above is no punch-through holes automatically return, please move down the middle of the proximity switch, if you have rushed to the pipe below, please move up in the middle of the proximity switch.
5, when punching hard, Chong-pin blade check whether passivation, passivation Please if you have red needles removed to grind it, or to buy new factory Chong-pin.
6, the temperature of the car seat hydraulic punching machine hydraulic oil should be controlled between 30 ~ 60 ℃. In cold weather should be switched to run empty for some time; for punching a long time, you should always check the oil temperature is overheating; not hot summer day operations, to avoid the midday heat time.
7, car seat hydraulic punching machine work 10,000 hours or four years (whichever occurs first), replace the hydraulic oil and check the hydraulic cylinders, hydraulic pump damage.
Many customers because there is no right to operate a good hydraulic punching machine, resulting in mold mold damaged, unreasonable long-term operation, not only affects the die life, the life of the machine can also cause a bad influence. When you use the car seat hydraulic punching machine should be noted that the above-mentioned points.