Cause the center of Punching Machine is blocked.

One, Punching Machine water tank rust, scaling

The rust and scale of the water tank of the Punching Machine is the most common problem. Rust and scale can limit the cooling liquid in the cooling system of activity, reduce the cooling effect, leading to the engine overheating, and even cause engine damage.

To two, punching machine fuel system maintenance is not in place

The fuel system of punching machine maintenance including replacement fuel filter, carburetor or fuel injectors and fuel supply lines. Fuel oil through oil supplied to the combustion process, inevitably will gum and coke formation, in oil, carburetor, fuel injection nozzle and combustion chamber deposited, the fuel disturbance activities, the destruction of normal air fuel ratio, poor fuel atomization, resulting in engine breathe shake, knock, unstable idle speed, acceleration and other functions of.

By three, press the crankcase oil sludge too much

Engine in operation process, combustion chamber pressure unburned gas, acid, moisture, sulfur and nitrogen oxides through the gap between piston ring and cylinder wall into the crankcase, the parts wear of metal powder mixed together, to form sludge. A small amount of sludge can be in oil suspension, equivalent from oil in precipitation, blocking filter and the oil hole, cause the engine lubrication problems, thereby increasing deep throat punch engine wear.

For four, press filter air filter

The engine intake system is mainly composed of two parts, the air filter element and the intake port. According to the different use, to clean the air filter, the method can be used by the high pressure air from the inside out, the filter out of the dust in the filter.Cause the center of Punching Machine is blocked.

One, Punching Machine water tank rust, scaling

The rust and scale of the water tank of the Punching Machine is the most common problem. Rust and scale can limit the cooling liquid in the cooling system of activity, reduce the cooling effect, leading to the engine overheating, and even cause engine damage.

To two, punching machine fuel system maintenance is not in place

The fuel system of punching machine maintenance including replacement fuel filter, carburetor or fuel injectors and fuel supply lines. Fuel oil through oil supplied to the combustion process, inevitably will gum and coke formation, in oil, carburetor, fuel injection nozzle and combustion chamber deposited, the fuel disturbance activities, the destruction of normal air fuel ratio, poor fuel atomization, resulting in engine breathe shake, knock, unstable idle speed, acceleration and other functions of.

By three, press the crankcase oil sludge too much

Engine in operation process, combustion chamber pressure unburned gas, acid, moisture, sulfur and nitrogen oxides through the gap between piston ring and cylinder wall into the crankcase, the parts wear of metal powder mixed together, to form sludge. A small amount of sludge can be in oil suspension, equivalent from oil in precipitation, blocking filter and the oil hole, cause the engine lubrication problems, thereby increasing deep throat punch engine wear.

For four, press filter air filter

The engine intake system is mainly composed of two parts, the air filter element and the intake port. According to the different use, to clean the air filter, the method can be used by the high pressure air from the inside out, the filter out of the dust in the filter.

keywords: hydraulic press machine manufacturers